Why Didn’t My Eyebrow Tint Work? 8 Causes and Fixes

Bliss
By Bliss
6 Min Read

This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases.

When brow tint doesn’t take, or fades in a few days, the cause is almost always one of eight things. The big three are oil on the hairs, a developer that’s old or the wrong strength, and not enough time for your hair type. Work through the list below, fix what applies, and wait 24 hours before trying again.

Quick diagnosis

What you see Most likely cause Jump to
No change at all Old or missing developer, wrong mix Causes 2 and 3
Patchy: some hairs dark, some light Oil, uneven coverage, grey hairs Causes 1, 4, 5
Dark on day 1, gone by day 3 Mostly skin stain; hairs barely took Causes 1 and 6
Color fine, but faded in a week Aftercare or skincare Cause 7
Tint looks red or orange Wrong shade for your hair Cause 8

1. Oil on the brow hairs

This is the most common reason by far. Moisturizer, sunscreen, brow gel, makeup and your own skin oil all coat the hairs and stop tint getting in.

Fix: Wash brows with an oil-free cleanser, then wipe with micellar water or a little toner on a cotton pad. Let them dry fully. Don’t apply anything else before tinting.

2. Old, expired or wrong developer

Tint needs a developer (usually a mild hydrogen peroxide) to work. Developer loses strength over time, especially after opening. Using the developer from another brand can also give weak results.

Fix: Check the expiry date and how long it’s been open. Use the developer made for your tint.

Developer refills

3. Mixed wrong or mixed too early

Too little developer, too much, or a mix that sat for 10 minutes before use can all fail.

Fix: Measure with care, mix just before you apply, and use it straight away. See our guide to mixing and applying tint.

4. Not enough tint on the hairs

A thin layer brushed over the top colors the surface but not the roots or undersides.

Fix: Apply against the direction of growth first, then smooth it back. Every hair should look fully coated.

5. Grey or coarse hairs

Grey hairs have no pigment and a tighter outer layer. They need full coverage and the longer end of your kit’s time range.

Fix: Coat greys first and use the longest time on the label. Our guide to tinting grey eyebrows covers this in detail.

6. Too short a time

If you wiped off early because the color looked dark, remember that most of what you see in the first minutes is on the skin, not the hairs.

Fix: Use the full time for your hair type, within the label’s limit.

7. Aftercare that strips color

Water in the first 24 hours, oily cleansers, retinol, acids, scrubs and chlorine all fade tint fast.

Fix: Keep brows dry for a day, then use oil-free products and keep actives off the brows. See how long tint should last.

8. The wrong shade for your hair

Some brown tints go warm on light or red hair. That can look like the tint “didn’t work” when it simply came out the wrong color.

Fix: Try a cooler shade, such as graphite or an ash brown. Our guide to fixing red or orange tint covers warm and orange results.

Kits that take reliably

How to re-tint after a failed attempt

  1. Wait at least 24 hours.
  2. Make sure the skin isn’t irritated.
  3. Clean the brows thoroughly.
  4. Use fresh developer and mix just before use.
  5. Coat fully and use the right time for your hair type.

If tint still won’t take after two careful tries, a salon can check whether a different product or a pre-treatment would help. Avoid more than two attempts in a week.

FAQ

Why is my eyebrow tint not taking? Usually oil on the hairs, weak or old developer, or too little time. Clean well, use fresh product and coat every hair.

Why did my brow tint wash off after one day? What washed off was mostly the stain on your skin. The hairs may not have taken much color. Clean them better before your next tint.

Can I tint my eyebrows again if it didn’t work? Yes, after 24 hours, as long as the skin isn’t irritated.

Why won’t my grey eyebrows take tint? Grey hairs resist color. Coat them fully and use the longest time your kit allows.

Share This Article
Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *