Eyebrow Tint Turned Red, Orange or Ashy? Why and How to Fix It

Bliss
By Bliss
5 Min Read

This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases.

When brow tint comes out the wrong tone, it’s usually because the shade didn’t suit your natural undertone, the tint was too light for your hair, or the color has faded and is showing its warm base. The fix follows the color wheel: cool, ash shades cancel red and orange; warm browns bring life back to brows that look flat or grey. In most cases you can correct it within a day or two.

Why tint changes color

Brown tint is a blend of pigments. Some are warm (red, orange, gold), some are cool (blue, green, violet). When everything develops evenly, you see brown. When it doesn’t, one side shows through.

  • Red or orange: Warm pigments are winning. Common on light, red or previously bleached brows, and as dark tints fade.
  • Ashy, grey or greenish: Cool pigments are winning. Common when a graphite or ash shade goes on very fair or grey hair.
  • Purple or blue: Too much cool pigment on light hair, or a blue-black tint on brown brows.

Troubleshooting table

Problem Likely cause Fix
Red or orange right after tinting Warm shade on light hair, or too short a time Re-tint after 24 hours with an ash or cooler brown
Brassy after 2 to 3 weeks Tint fading to its warm base Re-tint with a cooler shade next time; use an ash brow gel meanwhile
Grey, flat or slightly green Ash or graphite shade too cool for your hair Re-tint with a warmer light or medium brown
Purple or blue tone Blue-black or black on brown or light hair Wait for it to soften; next time use dark brown
Too dark and warm Wrong shade plus too long Lighten first, see our removal guide

How to fix red or orange brows

  1. Wait 24 hours. Some warmth calms down once the skin stain fades.
  2. Choose an ash or cool shade, such as graphite, ash brown, or a light brown with a cool base.
  3. Mix a cooler blend if your kit allows: for example, about 2 parts brown to 1 part graphite.
  4. Apply for a short time, starting at the shortest time on the label. You’re adjusting tone, not going darker.
  5. Check in daylight, then adjust next time.

Cool-tone fixers

How to fix grey or ashy brows

Use a warmer brown tint for a short time. Light brown is the safest choice on fair or grey hair, because it adds warmth without going dark. If the ashy look is mild, a warm-brown tinted brow gel may be enough.

Preventing tone problems

  • Match undertone, not just depth. If your hair looks golden or red in daylight, choose a neutral or slightly warm brown, not an ash. If it looks cool or ashy, choose graphite or ash brown. Our shade-matching guide shows how.
  • Clean brows well. Oil causes uneven development, which shows up as patchy tone.
  • Use fresh developer. Weak developer can leave some pigments under-developed.
  • Do a strand test on the brow tail if you’re trying a new shade or brand.
  • Protect from sun and chlorine, which fade cool pigments first and make tint look warm.

Mix your own shade

FAQ

Why did my eyebrow tint turn red? The shade was too warm for your hair, or the tint was too light to cover your natural warmth. A cooler ash shade usually fixes it.

How do I fix orange eyebrows after tinting? Wait 24 hours, then tint with a cool or ash shade for a short time. An ash brow gel helps in the meantime.

Why does my brow tint look grey? The shade is too cool for your hair, often on fair or grey brows. Switch to a light or medium warm brown.

Will brassy eyebrow tint fade? Yes. Warm tones fade along with the rest of the tint over 3 to 6 weeks.

Share This Article
Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *